2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance
Roll over image to zoom in Click on image to zoom
2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance2016+ Honda Civic 1.5T Front Pipe Upgrade - Two Step Performance

2016+ Honda Civic 1.5T Front Pipe Upgrade

PRL MotorsportsSKU: PRL-HC10-FP

Earn [points_amount] TSP Rewards points when you buy this item.

Price:
$399.99

Customer Reviews

Based on 22 reviews
100%
(22)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
G
Gilly (Chicago, US)
Quality front pipe and improved sound

The factory front pipe was a pain to remove with the factory shield, but with some patience was able to get in the perfect angle to remove it. Installation was a breeze and all the parts were included to install the front pipe. Definitely louder with my full race exhaust but also has a deeper tone does not sound raspy which I like. I can't wait to get a downpipe to complete my FBO Civic.

User picture
L
LBP

Great fitment, and not too hard to install. Can't comment on the sound increase since I replaced the FP-back exhaust at the same time, but it seems to be performing well. You will need to remove two bolts on the forward exhaust tunnel heat shield and then bend that shield as far up as you can in order to remove the stock FP and fit the PRL pipe. Don't be surprised if you get a rattle during your test drive - just means that you need to bend that heat shield some more!

L
LBP

3" OD end to end with PRL's quality welds and fitment. What's not to like?

L
LBP

Great front pipe. 3" OD throughout, excellent welds.

123

Description

Description

Fits all 2016-2021 Civic 1.5T
Fits all variant models including Si, CVT 6MT, RHD, International Models, Etc.

Overview

Important Notes:

  • NO TUNE REQUIRED
  • COMPATIBLE WITH FACTORY AND/OR MOST AFTERMARKET DOWNPIPES – NO ADAPTER NECESSARY

Technical Notes:

The PRL Motorsports front pipe upgrade promotes optimal airflow and is recommended for customers who have already purchased a downpipe upgrade and are looking to push his or her 2016+ 1.5L Turbo Honda Civic even further.

Our design utilizes 16 gauge mandrel bent 3" tubing, CNC machined flanges and high quality, reinforced flex-section. All components are 304 stainless steel and fully back-purged on site to withstand high exhaust gas temperatures. Pair this with our 3" Downpipe Upgrade for maximum exhaust flow and performance! All kits will include gaskets, stainless hardware, and components needed for a seamless installation.

Exhaust components that may become damaged over time from being coated, heat wrapped or otherwise insulated in some capacity are not covered under the PRL Motorsport's Manufacturer Warranty. Insulating these components can cause heat to cause degradation of the material faster than would normally occur.

Performance Gains:

  • Increased mid-range & top-end exhaust flow

Kit Includes:

TSP Rewards

Purchase this product and earn $8.00 towards your next purchase!

You may also like

Recently viewed