TSP Flex Fuel Plug-n-Play Kit for Ktuner or Hondata (10th Gen Civic, 1.5T engine)
Installation requires the following:
- Disconnecting the OEM fuel line (above the intake manifold) and replacing it with our modified OEM fuel line with a Flex Fuel Sensor added
- Unplugging a fuse in the engine bay fuse box, and plugging in the add-a-circuit we are providing, which will power the kit. You will be required to cut a small notch into the side of the fuse box to allow the wire to exit.
- The ground for the kit will be just behind the fuse box. You will take advantage of a factory grounding point under a 10mm bolt.
- You will unplug the ECT2 sensor (located on the lower, passenger side of the radiator) and plug in the connector from the Flex Fuel Converter.
Total install time is estimated at about 30 minutes. Detailed instructions are provided. We also include information on how to enable Flex Fuel base maps in both the Ktuner and Hondata software. (The kit is compatible with both platforms.)
You will find an immediate and very noticeable increase in performance with either of the Flex Fuel base maps, but like all modifications, to extract the most power a custom tune is recommended. We have partnered with Derek Robinson of IMW to offer custom tunes (at an additional cost) to anyone that is interested.
If you'd like to add a custom tune, one can be bundled.